Right chemistry, every heat
Spectrometer and CE analysis before pouring, micro image analysis after. If a heat is not right, it does not leave the furnace.
01 Our story
Why we built the plant this way
Ferro Tech Alloys was set up to make grey and SG iron castings that meet the drawing every time, from one heat and one order to the next.
So we invested early in the parts of a foundry that buyers rarely see: an Inductotherm double-crucible furnace for stable melting, a high-pressure moulding line for consistent moulds, an automated sand plant with reclamation, and a laboratory that checks chemistry, microstructure, hardness and sand properties every day. Around that core we built a machine shop and powder coating plant so customers can receive finished, fit-ready components from a single supplier.
Today we serve the power, automotive and tractor, and bearing industries, and we sell complete pillow block bearings under our own HBT brand.
IN-STREAM INOCULATION Controlled at the pour
02 By the numbers
Capacity
Sized for steady production programmes, with the flexibility of two moulding lines for different box sizes and batch quantities.
Annual capacity
5,000MT
Installed annual capacity
Melting
2 × 500KG
Inductotherm double crucible
Casting weight
0.5–200KG
Per piece
Moulding lines
2
HPML 650×750 · APRA 550×600
03 What we stand for
What buyers can expect
Consistent over long runs
High-pressure moulding, shooter-made cores and a controlled sand system mean part number 5,000 matches part number one.
One team, one point of contact
One team runs pattern design, the foundry, machining and coating, so one company is responsible for the finished part.
04 Quality system
ISO 9001 certified.
Our quality management system is certified to ISO 9001, covering enquiry review, pattern development, process control, inspection and dispatch.
- Documented process control from raw material receipt to dispatch
- Heat-wise traceability of chemistry, microstructure and hardness
- Daily sand testing in our own sand laboratory
- Test reports supplied with dispatches on request
SG IRON Graphite nodules under the microscope
05 Location
Located in Delhi NCR
Our plant sits in the National Capital Region, with fast road access to automotive, tractor, power and engineering clusters across North India.
Image credits
Placeholder photography used until plant photos are supplied. "In-stream inoculation..." by Sm faysal, CC BY-SA 4.0, via Wikimedia Commons · "Molten Metal Pouring from a Ladle" by Mnooralam11, CC BY 4.0 · "Cast iron ductile" by Perlit86, CC BY 4.0 · "Tsugami CNC Lathe" by Whoisjohngalt, CC BY-SA 4.0 · "Internal Roller Burnishing Tool on a CNC Lathe" by Leedonaldson911, CC BY-SA 4.0 · Grinding sparks photo via Unsplash (Unsplash License). Images resized and compressed.